+86-18957717686 
XINDALI · Selector Switch Sourcing Guide
Looking for an Alternative to ABB 1SFA619200R1076?
A practical sourcing guide for OEMs, control-panel builders and industrial buyers comparing 22 mm selector switches with the ABB C2SS1-10B-11 reference configuration.
Reference Configuration
ABB Order Code 1SFA619200R1076
Type C2SS1-10B-11
Positions 2
Operation Maintained
Contacts 1NO + 1NC
If you are currently using ABB 1SFA619200R1076 / C2SS1-10B-11 and are evaluating an alternative supplier, the correct approach is not simply to find another switch that looks similar. A suitable alternative must be checked for mounting dimensions, switching function, contacts, electrical ratings, environmental protection and project certification requirements.
What Is ABB 1SFA619200R1076?
ABB order code 1SFA619200R1076 corresponds to the C2SS1-10B-11 compact selector switch. It is commonly specified as a black, non-illuminated, two-position maintained selector switch using a 1NO + 1NC contact arrangement.
ABB C2SS1-10B-11 Reference Specifications
| ABB Order Code | 1SFA619200R1076 |
|---|---|
| ABB Type | C2SS1-10B-11 |
| Device | Selector Switch |
| Positions | 2 Positions |
| Operating Mode | Maintained |
| Illumination | Non-illuminated |
| Handle Color | Black |
| Contacts | 1NO + 1NC |
Can a 22 mm selector switch replace ABB 1SFA619200R1076?
Potentially, but not automatically. A 22 mm panel cutout is only one part of the compatibility check. The operating mode, contact arrangement, rear mounting depth, electrical rating, IP protection and certifications must also meet the requirements of the equipment.
What Should Be Checked Before Selecting an Alternative?
Industrial buyers and control-panel manufacturers should compare the complete technical specification before approving a new selector switch for production.
Panel Cutout
Verify that the switch fits the existing panel opening and mounting system without enclosure modification.
Operating Function
Confirm the correct number of positions and whether the switch is maintained or spring return.
Contact Configuration
Check whether the application requires 1NO, 1NC, 1NO+1NC, 2NO or another switching combination.
Electrical Rating
Voltage and current ratings must be suitable for the actual machine or control circuit.
Environmental Protection
Check IP requirements for dust, water, washdown, outdoor or marine installation environments.
Certification
CE, UL, TÜV or project-specific approvals may be required according to the destination market or application.
Is 1NO + 1NC Important When Choosing a Replacement?
Yes. A 1NO + 1NC configuration provides one normally open and one normally closed contact. This allows one circuit to close while another circuit opens when the selector changes state.
A switch with only 1NO or only 1NC may look almost identical from the front but can behave differently inside the control circuit.
Engineering note: Always verify both the number of contacts and the switching sequence before approving an alternative component.
What Is the Difference Between Maintained and Momentary?
Maintained
The selector remains in the chosen position after the operator releases the handle.
Momentary
The selector automatically returns to its original position after the operator releases it.
Where Are 2-Position Selector Switches Used?
- Industrial control panels
- Machine control cabinets
- HVAC control systems
- Pump control panels
- Material handling equipment
- Hoists and lifting systems
- Automation equipment
- Marine control cabinets
- OEM machinery
- Push button control stations
Can XINDALI Supply a 22 mm Selector Switch Alternative?
XINDALI supplies industrial pilot devices and control components for OEM machinery and control-panel applications.
Depending on project requirements, selector switch configurations can include different operating functions, contact arrangements, handle designs and control-panel combinations.
- 2-position configurations
- 3-position configurations
- Maintained operation
- Spring-return operation
- 1NO / 1NC / 1NO+1NC
- Non-illuminated options
- OEM project support
- Control station integration
Important: A recommended XINDALI model should be technically verified for the specific application before being considered a direct replacement. Dimensions, electrical characteristics, IP rating and certification requirements may differ between manufacturers.
Why Do OEMs Use a Second Source for Selector Switches?
Many equipment manufacturers qualify more than one supplier for commonly used control components. A second source can reduce procurement risk while improving supply-chain flexibility.
- Reduce supply interruption risk
- Shorten procurement lead time
- Improve cost control
- Reduce single-source dependency
- Support production expansion
- Improve OEM supply flexibility
Do marine applications require special selector switch approvals?
Some marine, shipbuilding and offshore projects may specify additional environmental or certification requirements. Requirements depend on the vessel, installation location, classification rules and the customer's approved component list.
If the switch will be installed in a marine HVAC panel or shipboard control cabinet, tell the supplier about the application during the RFQ stage.
What Information Should Be Included in an RFQ?
Complete technical information allows the supplier to identify the closest suitable configuration faster and reduces the risk of selecting an incompatible component.
- Original manufacturer
- Original part number
- Product photo
- Datasheet or drawing
- Panel cutout
- Number of positions
- Maintained or momentary
- NO / NC configuration
- Voltage and current
- Required IP rating
- Required certifications
- Order quantity
Can XINDALI Quote 100, 200, 300 or 400 Pieces?
Yes. XINDALI can provide quantity-based quotations for OEM and industrial projects. For repeat production, buyers may also provide estimated annual usage so that the appropriate supply and pricing plan can be evaluated.
Trial / Initial Batch
Suitable for initial supplier qualification and production evaluation.
Volume Supply
Quantity-based pricing can be discussed for regular OEM production requirements.
Need an Alternative to ABB 1SFA619200R1076?
Send XINDALI the original switch model, datasheet, application and required quantity. Our team can compare the key specifications and recommend a suitable configuration for evaluation.
22 mm Selector Switches OEM / ODM 100–400+ pcs Control Panel Components Custom Control Stations
Request a Quote → Frequently Asked Questions
What is ABB 1SFA619200R1076?
ABB 1SFA619200R1076 is the order code for the C2SS1-10B-11 compact selector switch, commonly specified as a black, non-illuminated, 2-position maintained selector switch with 1NO+1NC contacts.
Can another 22 mm selector switch directly replace it?
Not automatically. Mounting size, switching function, electrical rating, dimensions, IP protection and certification requirements must all be checked.
What does 1NO + 1NC mean?
It means the selector switch provides one normally open contact and one normally closed contact.
What is a maintained selector switch?
A maintained selector switch remains in the selected position after the operator releases the handle.
Can XINDALI supply selector switches for OEM projects?
Yes. XINDALI supplies industrial pilot devices for OEM applications including selector switches, push buttons, emergency stops, indicator lights and custom control stations.
Can I request pricing for 100, 200, 300 and 400 pieces?
Yes. Quantity-based quotations can be provided for industrial and OEM projects.