⊹ Products Introduction:
LW130 sereies rotary switch applied to circuits of AC 50Hz with working voltage up to 440V and rated working current up to 100A.
LW130 is suitable to control:air-conditioner,water pimp and ventilating equipments,and AC motors with small power.
LW130 series rotary switch have six current ratings:20A,32A.40A,63A,80A,100A.
LW130 series has the finger protection terminals,which offers an extra advantage.
LW130 series switch has larger insulation diatance,quick disconnecting response.And is a good choice for DC circuits.LW30 has additional contact which enable us to install eht contact separetely.
LW130 series rotary switch comply with:GB/T 14048.3.and IEC 60947-3.
⊹ Working Conditions:
a.Ambient temperature DO NOT exceed 40℃, and the average temperature,measured over a period of 24 hours,DO NOT exceed 35℃.
b.Ambient temperature should not be below -25℃.
c.Should not be isstalled above 2000m above sea level.
d.The humidity should not exceed 50% when the ambient temperature is 40℃ and higher humidity is allowed for lower temperature.
⊹ Installation Conditions: a.A clean environment is required b.Please follow our manual
|Rated thermal current||25(20)|
|Rated working voltage||240||440|
|Rated working current||/||/|
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist